|
It is currently September 9th, 2010, 12:42 am
|
 |
|
 |
|
| Author |
Message |
|
Cameron
|
Post subject: GRLevel3 1.73  Posted: March 1st, 2010, 7:54 pm |
| Administrator |
 |
Joined: October 4th, 2009, 2:53 pm
Posts: 54
|
Hi all, GRLevel3 1.70 is now out! http://www.grlevelx.com/Quote: I've uploaded GRLevel3 version 1.70. It contains the following changes:
1) Support for the new high resolution Base Reflectivity (HR-BR) and Base Velocity (HR-BV)
2) Conversion of high res Base Velocity into high resolution Storm Relative Velocity (HR-SRV)
3) Support for Storm Relative Velocity color tables
4) New default reflectivity color table, suitable for the new HR-BR
5) Support for large background images on limited graphics hardware
6) Removed distinction between legacy Storm Total Rainfall and Digital Storm Precipitation
7) Force download of placefile components
The new HR-BR and HR-BV products have several significant improvements over their legacy L3 counterparts:
a) The data value resolution has increased from 16 levels to 256 levels
b) HR-BR's range has increased from 230 to 460 km
c) HR-BV's bins went from 1km down to 250m
These are the equivalent to the legacy Level II versions of these products. Right now, only the Central, Western, and Alaska regions output this high resolution L3 data. In addition, only the lowest tilt of BR and BV are supported in high res.
In order to see HR-SRV, you must have both BV and SRV set to download in GRLevel3.
Mike
Cameron
|
|
|
|
 |
|
crossmaker69
|
Post subject: Re: GRLevel3 1.70 Posted: March 3rd, 2010, 5:42 am |
|
|
|
Grlevel3 is not found at grlevelx.com. It is only found in the owners forum thus far. It needs to be posted on the home page perhaps Mike is waiting for the upgrade to be completed.
|
|
|
|
|
|
|
mn103spottertj
|
Post subject: Re: GRLevel3 1.70 Posted: March 3rd, 2010, 8:43 am |
| Member |
 |
Joined: October 4th, 2009, 9:52 pm
Posts: 276
Location: Minnesota
|
crossmaker69 wrote: Grlevel3 is not found at grlevelx.com. It is only found in the owners forum thus far. It needs to be posted on the home page perhaps Mike is waiting for the upgrade to be completed. Actually when you go to grlevelx.com then go to download gr3 and then scroll down to grupdate and download. I recently found that out after I was on the owner's forum.
_________________
|
|
|
|
|
|
|
mn103spottertj
|
Post subject: Re: GRLevel3 1.71 Posted: March 3rd, 2010, 11:37 am |
| Member |
|
Joined: October 4th, 2009, 9:52 pm
Posts: 276
Location: Minnesota
|
This is an Update on GRLevel3. GRLevel3 1.71 is now out! http://www.grlevelx.com/Quote: I've uploaded GRLevel3 version 1.71. It contains the following changes:
1) Added support for high-res data from the Southern region
2) Removed disabled 0.9 and 1.8 items from the Products menu
I've uploaded GRLevel3 version 1.70. It contains the following changes:
1) Support for the new high resolution Base Reflectivity (HR-BR) and Base Velocity (HR-BV)
2) Conversion of high res Base Velocity into high resolution Storm Relative Velocity (HR-SRV)
3) Support for Storm Relative Velocity color tables
4) New default reflectivity color table, suitable for the new HR-BR
5) Support for large background images on limited graphics hardware
6) Removed distinction between legacy Storm Total Rainfall and Digital Storm Precipitation
7) Force download of placefile components
The new HR-BR and HR-BV products have several significant improvements over their legacy L3 counterparts:
a) The data value resolution has increased from 16 levels to 256 levels
b) HR-BR's range has increased from 230 to 460 km
c) HR-BV's bins went from 1km down to 250m
These are the equivalent to the legacy Level II versions of these products. Right now, only the Central, Western, and Alaska regions output this high resolution L3 data. In addition, only the lowest tilt of BR and BV are supported in high res.
In order to see HR-SRV, you must have both BV and SRV set to download in GRLevel3.
Mike
_________________
|
|
|
|
|
|
|
crossmaker69
|
Post subject: Re: GRLevel3 1.70 Posted: March 3rd, 2010, 5:23 pm |
|
|
mn103spottertj wrote: crossmaker69 wrote: Grlevel3 is not found at grlevelx.com. It is only found in the owners forum thus far. It needs to be posted on the home page perhaps Mike is waiting for the upgrade to be completed. Actually when you go to grlevelx.com then go to download gr3 and then scroll down to grupdate and download. I recently found that out after I was on the owner's forum. Thank you.... 
|
|
|
|
|
|
|
Cameron
|
Post subject: Re: GRLevel3 1.72 Posted: March 11th, 2010, 7:41 pm |
| Administrator |
|
Joined: October 4th, 2009, 2:53 pm
Posts: 54
|
|
1.72 is now out.. all of the US is now supported.. there are about 21 sites that don't have HR, but they should be upgraded in the next few weeks.
|
|
|
|
|
|
|
Cameron
|
Post subject: Re: GRLevel3 1.73 Posted: March 23rd, 2010, 3:44 pm |
| Administrator |
|
Joined: October 4th, 2009, 2:53 pm
Posts: 54
|
Get version 1.73! Quote: I've uploaded GRLevel3 version 1.73. It contains the following change: 1) Updated radars.gis to set all nexrads to high res mode http://www.grlevelx.comExit all running instances of GRLevel3 then run the updater. There are no more slacker sites!Mike
|
|
|
|
|
|
|
Derek
|
Post subject: Re: GRLevel3 1.73 Posted: March 23rd, 2010, 5:31 pm |
| Administrator |
|
 |
Joined: October 2nd, 2009, 1:34 pm
Posts: 424
Location: St Louis, MO
|
Cameron wrote: Get version 1.73! Quote: I've uploaded GRLevel3 version 1.73. It contains the following change: 1) Updated radars.gis to set all nexrads to high res mode http://www.grlevelx.comExit all running instances of GRLevel3 then run the updater. There are no more slacker sites!Mike Nice! I don't like slacker sites..
|
|
|
|
|
|
|
|
 |
|
 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
